Hoja de dato de productos

talia led



• Bollard light for outdoor installation. • Configuration: extruded aluminium structure • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Clipped Uv-stabilized opal polycarbonate diffuser. The LED module is housed in a sealed transparent polycarbonate cylinder with compensation valve. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 6 W 123 lm 20 lm/W 6000 K 70
talia led

talia led 

Emisión de luz 1 (integrada) 


Tipo de Montaje 


Forma y medidas 

Longitud: 35 mm

Anchura: 120 mm

Altura ajustable: 560 mm




Potencia: 6 W

Clases de aislamiento: II


IP: 65

IK: 08

Dato fotométrico

ZIP file