Produktdatenblatt

talia led

503001

FLOS

• Bollard light for outdoor installation. • Configuration: extruded aluminium structure • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Clipped Uv-stabilized opal polycarbonate diffuser. The LED module is housed in a sealed transparent polycarbonate cylinder with compensation valve. 

Lampentyp Lampen-Nennleistung Gesamtlichtstrom Leuchten-Lichtausbeute CCT CRI
LED 6 W 123 lm 20 lm/W 6000 K 70
talia led

talia led 

Lichtaustritt 1 (integriert) 

LED 

Montageart 

Stehleuchte / Poller

Bauform und Abmessungen 

Länge: 35 mm

Breite: 120 mm

Höhe: 560 mm

Ausrichtbarkeit 

Starr

Elektrik 

Systemleistung: 6 W

Schutzklasse: II

Schutzeigenschaften 

IP: 65

IK: 08

Photometrie-Dateien

ZIP file