Информация о продукте

MICRORING SEMI ACID-ETCHED GLASS

S.4943W.19

SIMES

MICRORING Art. S.4943W.19 MODULES LED 3000K 230V 1W CRI 90 MacAdam step 3 Rated luminaire luminous flux: 86lm Rated input power: 2.2W Luminaire efficacy: 39lm/W Electronic ballast 220÷240V AC 50-60Hz CE Fixture available with external DALI driver on request with surcharge. LUMINAIRE TYPE Inground drive over fitting. Recessing depth 175 mm. IP rating IP 65 IP67 MATERIAL CHARACTERISTICS 'Copper Free' Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 3 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10 Maximum load capacity 5000 Kg LIGHTING PERFORMANCE semiacid-etched Toughened glass 12mm thick. Lamp adjustable ±15° position. LOR -- Compact electronic ballast to guarantee better lamp stability, lifetime and reduced energy consumption. LOW SURFACE TEMPERATURE Surface temperature of glass 30°C (Ta 25°C) Electronic Ballast generating less heat. Specific layout of internal components allow for better heat dissipation therefore limiting the temperature generated inside the fitting. RECESSING BOX Recessing box in Polypropylene with cable entry on all 4 sides also allows: 1) Easy wiring; 2) Cable management for fast connector; 3) Easy access to the fitting for maintenance purposes. WIRING Supply 0.5m cable section type H07RN-F secured by cable gland PG 13.5 (Ø 6÷12 mm) and sealed with B component epoxy resin, wired internally protected by silicon sheaths. Fast connector M20 (Ø 5÷14 mm) supplied as standard for single cable connection . Connector housed inside the recessing box . Front re-lamping without removing the complete fitting . Isolation: CLASS I . Available colours: Stainless steel (cod.19). Weight: 1.7 Kg Glow Wire test: 750°C L.E.D circuit included. This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user. LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded. 

Тип лампы Номинальная мощность лампы Общий световой поток Световая отдача CCT CRI
2,2 Вт 86 lm 39 lm/W 3022 K 91
MICRORING  SEMI ACID-ETCHED GLASS

MICRORING SEMI ACID-ETCHED GLASS 

Световой выход 1 (интегрированный) 

Монтаж 

Грунтовые

Форма и размеры 

Высота: 4 мм

Диаметр: 106 мм

Регулируемость 

Вращающий

дизайн 

Поверхность: Стекло, Нержавейка

Дизайнер: SIMES S.P.A.

Электрика 

Мощность: 2,2 Вт

класс защиты: I

Защита 

IP: 67

IK: 10

Макс. нагрузка точки (кг): 5000 кг

Обозначение: CE

Фотометрические данные

ZIP file