Scheda tecnica

tapioca led

1005640

FLOS

• Recessed luminaire for outdoor installation in wall, ceiling or floor. • Configuration: die-cast aluminium structure EN AB-47100 alloy (low copper content) available in round and square version. • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • The luminaire is composed of a wiring unit connected to an emitting unit with different designs: only glass-round and square; anodized aluminium frame-only round. The glass is fixed to the aluminium structure through a robitic gluing system. • Tempered transparent or sandblasted glass. 

Tipo di lampada Potenza nominale Flusso totale Emissione luminosa CCT CRI
LED 4,5 W 223 lm 50 lm/W 3000 K 80
tapioca led

tapioca led 

Emissione luce 1 (integrata) 

LED 

Tipo di montaggio 

Incasso a pavimento

Forma e Dimensioni 

Altezza: 70 mm

Diametro: 70 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 4,5 W

Classe di protezione: III

Grado di protezione 

IP: 67

IK: 08

Photometric data

ZIP file