Scheda tecnica

maxiPetra

0971130

FLOS

• Recessed round luminaire for outdoor installation in the ground. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). AISI 316L stainless steel frame. • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent or sandblasted glass (no-slip glass VA on request) and moulded silicone gasket. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x Ioduri metallici 70 W 7000 lm 50 lm/W 3000 K 84
maxiPetra

maxiPetra 

Emissione luce 1 

1 x Ioduri metallici 

Tipo di montaggio 

Incasso a pavimento

Forma e Dimensioni 

Altezza: 320 mm

Diametro: 302 mm

Regolazione 

Orientabile

Cablaggio / Dimming 

Potenza sistema: 70 W

Classe di protezione: I

Grado di protezione 

IP: 67

IK: 09

Photometric data

ZIP file