Scheda tecnica

chiara led

530001

FLOS

• Round recessed luminaire for outdoor installation on wall and ground. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Sandblasted glass with silkscreen border, AISI 316L blasted stainless steel frame. 

Tipo di lampada Potenza nominale Flusso totale Emissione luminosa CCT CRI
LED 7 W 543 lm 78 lm/W 6000 K 70
chiara led

chiara led 

Emissione luce 1 (integrata) 

LED 

Tipo di montaggio 

Incasso a pavimento

Forma e Dimensioni 

Altezza: 53 mm

Diametro: 130 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 7 W

Classe di protezione: I

Grado di protezione 

IP: 67

IK: 08

Photometric data

ZIP file