Scheda tecnica

Leo 120 on post

12316246 on post

FLOS

Outdoor luminaire for installation on wall or on post. Configuration: die-cast aluminium structure . EN AB-47100 (low copper content). Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Sandblasted glass. Moulded silicone gaskets. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x Ioduri metallici 20 W 1700 lm 9 lm/W 3000 K 81
Leo 120 on post

Leo 120 on post 

Emissione luce 1 

1 x Ioduri metallici 

Tipo di montaggio 

Testapalo

Forma e Dimensioni 

Lunghezza: 120 mm

Larghezza: 120 mm

Altezza: 170 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 20 W

Classe di protezione: I

Grado di protezione 

IP: 65

IK: 05

Photometric data

ZIP file