Scheda tecnica

Pom Opal-Wall Light

7550-0-3-873-XX

Unilamp

Description POM is the family of unshielded bollard with symmetrical light distribution. High power COB LED is installed inside this luminaire. It is available in 2 color temperature 3000K and 4000K. The impact resistant PC lens cover is available in prismatic and opal, both producing a uniform wide beam light distribution. POM is generally installed in the walk ways, parks, gardens, commercial areas and open spaces where general lighting is needed. We produce the bollard at different height according to the customer design. Anchorage unit for concrete foundation is available as an accessory. Spec • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Polycarbonate diffuser. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x LED 20 W 1800 lm 90 lm/W 3000 K 80
Pom Opal-Wall Light

Pom Opal-Wall Light 

Emissione luce 1 

1 x LED 

Tipo di montaggio 

Montaggio a parete

Forma e Dimensioni 

Lunghezza: 250 mm

Larghezza: 175 mm

Altezza: 337 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 20 W

Classe di protezione: I

Grado di protezione 

IP: 65

IK: 10

Photometric data

ZIP file