Fichier produit

VLF-T16-R1x145/45DA-370O840

0560044

RIDI

Batten luminaire VLF-T16-R Design: Light batten for surface and pendant mounting. Rigid steel profiled luminaire housing made of sheet steel, coated white on both sides. End pieces in plastic complete with knock-outs for through wiring inside or outside of the luminaire. Profiled ceiling plate with an indented channel on the ceiling side for through wiring external to the luminaire, max. 3 x 1.5 mm² / diameter 8 mm. For RIDI-TUBE lamp (order separately). Electronic DALI converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Simple, low-cost single-handed mounting of the luminaire ceiling plate using screws or similar (not included) through the keyhole-shaped hole in the plate. The fixing kits used for LINEA-DECO can be used for pendant mounting. The battens of the series VLF can be fitted with a large selection of reflectors, mirror reflectors and louvres. 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 31 W 3700 lm 119 lm/W 4000 K 80
VLF-T16-R1x145/45DA-370O840

VLF-T16-R1x145/45DA-370O840 

Surface lumineux 1 (integré) 

LED 

Type de montage 

Plafonnier

Forme et dimensions 

Longueur: 1478 mm

Largeur: 47 mm

Hauteur: 62 mm

Réglable 

Rigide

Électrique 

Puissance du système: 31 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file