Fichier produit

VLGFP0501-5NDWS830R0250

1551024

RIDI

Continuous-row luminaire VLGFP Design: LED gear tray made of sectional extruded aluminium, powder coated white (…WS-…), silver (…SI-…) or black (...SW-...). RIDI LED linear modules fitted with mid-power LEDs for outstanding efficiency. The boards are pressed over their entire surface onto the aluminium base profile for optimum heat dissipation. Soldered joints of the LED modules are tested for cavities and resistance to vibration and torsion in compliance with the most stringent quality standards. No thermal coupling between the LED modules and converters. End caps made of thermoplastic for conformity with IP54 protection rating. The width of the gear tray is identical to the trunking. Spring steel clips for fixture of the gear tray in the trunking VLT. In conjunction with trunking VLT for the configuration of modular variable continuous lighting systems conforms to protection rating IP20 and IP54. The gear trays can be mounted at any preferred location on the trunking. Electrical adapters for flexible take-off of the through wiring in the trunking with automatic PE conductor connection. Phase selection by means of sliding contact. Colour and optical coding for simple installation. Mechanical coding to prevent incorrect installation (polarity reversal). Where gear trays are variably positioned and where the electrical components come into contact with the trunking connector, mounting is only possible using trunking connector VLTV …-600. Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems. VLGFP ... R Shelf-lighting optics with double asymmetric light distribution made of clear, UV-resistant PMMA, integrated into the gear tray flush-mounted. 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 18 W 2500 lm 139 lm/W 3000 K 80
VLGFP0501-5NDWS830R0250

VLGFP0501-5NDWS830R0250 

Surface lumineux 1 (integré) 

LED 

Type de montage 

Suspendu, Plafonnier

Forme et dimensions 

Longueur: 500 mm

Largeur: 64 mm

Hauteur: 70 mm

Réglable 

Rigide

Électrique 

Puissance du système: 18 W

Types de protection 

IP: 54

Fichier Photométrique

ZIP file