Moistureproof luminaire PFZOA-T16-R
Surface-mounted hostile environment luminaire IP66 for ceiling or pendant mounting. Luminaire housing in glass fibre-reinforced grey polyester. Sealing material to ensure protection rating compliance for the diffuser and captive diffuser clips made of ageing-resistant plastic (not oil-proof). For RIDI-TUBE. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request.
RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base.
Electronic converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 3x2.5mm². Suitable for direct voltage operation and use in central battery systems.
Ceiling mounting without additional accessories using fixing catches which clip into the luminaire (included with luminaire). Wall mounting possible with accessory ZBS-W PFZ (must be ordered separately).
Note on “Food Hygiene Act”: These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires.
These are suitable for use in the food industry.
Opal, impact-resistant diffuser in UV-stabilised PMMA with internal longitudinal prisms. For RIDI-TUBE lamp (order separately), recommended cover: matt.