Industrial luminaire IHLS - IP65
Surface-mounted industrial luminaire protection rating IP64 for ceiling, pendant or rail mounting. Rigid galvanised steel luminaire housing with white powder coated finish, colour similar to RAL9016. Prefitted top mirror reflector in high-reflectance matt anodised super-purity aluminium with silver coating. Narrow frame in extruded aluminium with panel of impact-resistant UV stabilised acrylic (PMMA). Frame retained in the luminaire housing by spring clips, hinges downwards on both sides.
With electronic multiwatt ballast (MW-EVG), warm start lamps, 220-240 Volt, 0/50-60 Hz and internal connector block 5x2.5mm².
• Ceiling mounting without additional accessories using attached cap profiles or directly on the ceiling with accessory IHLS-DB …..
• Pendant mounting on chain or wire using attached cap profiles.
• Trunking mounting with fixing clips or standard fastenings.
Note "ball resistant":
RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting. They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA or VDE.
Note on “Food Hygiene Act”:
These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires. These are suitable for use in the food industry.
IHLS ... OS
Opal panel OS in PMMA, reflector made of high-reflectance matt anodised super-purity aluminium with silver coating.