Fichier produit

ABR-L 380/1860-840 T



Sports hall LED luminaire Design: Surface-mounted luminaire for ceiling, pendant or trunking rail mounting. Includes RIDI-LED lamp L-TUBE-B. Luminaire housing in white powder coated steel, colour similar to RAL 9016. End caps with additional break-outs for cables or through wiring and for fastening with M5 screws for continuous luminaire mounting. Louvre fixed using fastening catches, hinges down on both sides with automatic connection to the earth conductor. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840) Lampholder system: Aluminium cap profile fixture on the luminaire side for efficient heat transfer, spring steel fixing clip on the lamp side for positive locking connection with cap profile. Locking on the longitudinal side by means of a catch. Easy removal through blue plastic component. Plug and socket electrical connection. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Pendant mounting using suitable fixing kits. Ceiling mounting using the provided slotted washers. Rail mounting on trunking TRAS or VLTO. Ball resistant ceiling or pendant mounting of the 2, 3 and 4-lamp luminaires is only possible with 4-point fixing on two parallel lengths of trunking. When using trunking, 2 parallel rails are required for this. Note regarding wiring: ABR. 180, 280: all lamps are wired to L1. (180 with 1 device, 280 with 2 devices) ABR. 380: central lamp wired to L1, outer lamps to L2. (3 devices) ABR. 480: both central lamps wired to L1, outer lamps to L2. (4 devices) Other wiring arrangements are available on request. Note „ball resistant“: RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting. They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA or VDE. ABR-L ... T Ball resistant to DIN 18032. White steel louvre with patented fastening catches. White powder coated, colour RIDI reflex white, similar to RAL9016, reinforced with circular rods. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
3 x LED 50 W 6300 lm 105 lm/W 4000 K 80
ABR-L 380/1860-840 T

ABR-L 380/1860-840 T 

Surface lumineux 1 

3 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1549 mm

Largeur: 481 mm

Hauteur: 90 mm




Matériau: Mâte

Couleur du luminaire: Blanc


Puissance du système: 150 W

Tension: 230 V AC

Alimentation: ECG

Types de protection 

IP: 20

Resistant to impact of balls

Étiquette: CE, ENEC, F

Fichier Photométrique

ZIP file