Fichier produit




Batten luminaire VLF-T16-R Design: Rigid steel profiled luminaire housing made of sheet steel, coated white on both sides. End pieces in plastic complete with knock-outs for through wiring inside or outside of the luminaire. Profiled ceiling plate with an indented channel on the ceiling side for through wiring external to the luminaire, max. 3 x 1.5 mm² / diameter 8 mm. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Simple, low-cost single-handed mounting of the luminaire ceiling plate using screws or similar (not included) through the keyhole-shaped hole in the plate. For pendant mounting, the LINIA DECO fixing kits can be used. The battens of the series VLF can be fitted with a large selection of reflectors, mirror reflectors and louvres. Note: Luminaires with MM symbol are suitable for furniture mounting. Models without an index are not suitable. 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 21 W 3200 lm 152 lm/W 4000 K 80


Surface lumineux 1 (integré) 


Type de montage 


Forme et dimensions 

Longueur: 1178 mm

Largeur: 47 mm

Hauteur: 62 mm




Puissance du système: 21 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file