• Recessed round luminaire for outdoor installation in the ground. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). AISI 316L stainless steel frame. • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent or sandblasted glass (no-slip glass VA on request) and moulded silicone gasket.
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x Iodures métalliques | 150 W | 15500 lm | 54 lm/W | 3000 K | 85 |
Type de montage
Encastré de sol
Forme et dimensions
Hauteur: 320 mm
Diamètre: 302 mm
Réglable
Orientable
Électrique
Puissance du système: 150 W
Classe de protection: I
Types de protection
IP: 67
IK: 09
Fichier Photométrique
ZIP file