Fichier produit

SHL-L 180/620-840 W



Sports hall luminaire SHL-L with LED Design: Closed surface-mounted luminaire, ball-proof, includes lamp, for ceiling, pendant or trunking rail mounting. Rigid luminaire housing in white powder coated steel housing, colour similar to RAL 9016. Prefitted top mirror reflector in high reflectance super-purity aluminium with silver coating, matt anodized. Narrow frame in extruded sectional aluminium with panel in impact-resistant UV stabilised PMMA. Frame held in the housing with spring clips, hinges down on both sides. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request. Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 230 Volt, 0/50-60 Hz and external connector block. Suitable for direct voltage operation and use in central battery systems Mounting: Pendant and ceiling mounting of luminaires with suitable fixing kits. Time-saving click mounting on the TRAS trunking system without opening the luminaires. Pendant mounting of 1 and 2-lamp luminaires on one trunking rail, 3 and 4-lamp luminaires on two parallel trunking rails. Using accessory SHL-DB 0227922 the luminaires can be mounted directly on the ceiling or other fixing surface without trunking. For this, the luminaire must be opened. Continuous mounting using external connector SHL-LV, face end break-out D 20 for through wiring. Note "ball resistant": RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting. They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA or VDE. The ball resistant rating certifies the high level of robustness of these models, which is also a significant benefit in industrial luminaires. SHL-L ... W Clear panel and white aluminiuim louvre, symmetrical light distribution. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 50 W 6300 lm 97 lm/W 4000 K 80
SHL-L 180/620-840 W

SHL-L 180/620-840 W 

Surface lumineux 1 

1 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1500 mm

Largeur: 248 mm

Hauteur: 80 mm




Couleur du luminaire: Blanc


Puissance du système: 50 W

Types de protection 

IP: 40

Fichier Photométrique

ZIP file