Fichier produit

Graviton Round In-ground Uplighter



Description GRAVITON has been designed and manufactured to withstand the harshest inground installations. IP68 with post cured sealing. GRAVITON is available in high output LED light sources with choices of beam angled reflectors. With its robust construction techniques and extruded aluminium body GRAVITON is able to withstand drive over applications. Pre wired with Unilamp Anti Condensation kit there is finally an inground fixture on the market that can be installed with confidence. It can be used to illuminate plants, flagpoles, columns, building facades and also architectural works and landmarks. We highly recommend that the luminaire lay out should be considered during specifying and planning processes. Spec • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1, IEC 60598-2-13 and VDE regulations. • Marine grade 316 stainless steel front cover. • Extruded Aluminium body. • GFR polymer recess housing. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Safety glass cover. • Post-cured silicone gasket. • High quality LED module and driver. • High efficiency reflector. • M20 cable gland. • Pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. • For ground recess application, the water drainage system must be tested to ensure that it is working sufficiency and efficiency. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 23 W 3390 lm 147 lm/W 4000 K 80
Graviton Round In-ground Uplighter

Graviton Round In-ground Uplighter 

Surface lumineux 1 

1 x LED 

Type de montage 

Encastré de sol

Forme et dimensions 

Longueur: 224 mm

Largeur: 224 mm

Hauteur: 270 mm




Puissance du système: 27 W

Classe de protection: I

Types de protection 

IP: 67

IK: 09

Fichier Photométrique

ZIP file