Fichier produit

Dot Square Eyelid



The recess luminaires with the low voltage tangsten halogen and LED lamps.DOT family has a very shallow housing so they are good for architectural works which has a limited sapce.Because of low wattage consumption, the light output normally serve as marking light or directional light.They are widely used in stairway and pathway where small amount of lighting level is satisfied. Specification • Fixture is manufactured in compliance with international standard of general requirements IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaires IEC 60598-2-2. Electrical protection class3. Protection against dust and water IP55. Protection against mechanical impact IK07 on body and optical part. • Luminaire body housing made of high-pressure die cast aluminium alloy. Wall installation block out in Polypropylene. Front cover of INOX DOT in brush stainless steel. Corrosion resistance and suitable for outdoor use. • Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. • Self-extinguishing high impact resistant polycarbonate diffuser for DOT. Material from TEIJIN – Japan. IK07 vandal resistant. Impact resistant white-coated/sand-blast safety tempered glass cover for DOT RAMP, DOT GRILL and INOX DOT. • Molded silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C. • External screws in 316 stainless steel with silicone grease dipping. • Cable entry protected by weather proof PG11 synthesized rubber grommet. Prepare for H05RN-F / H07RN-F cable diameter 6 – 8mm. • G4 lampholder in PPS body CuNiZn contact from Vossloh Schwabe - Germany / ENEC approved. For low voltage halogen lamp. T240 rating 4/24 Leads come with lampholder in Cu tinned conductor with Si insulation. Available Color Black - RAL9005 (replace last 2 digits of ordering code with 01) Graphite - RAL7016 (replace last 2 digits of ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits of ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits of ordering code with 04) White - RAL9010 (replace last 2 digits of ordering code with 06) 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 1 W 35 lm 35 lm/W 0 K -50
Dot Square Eyelid

Dot Square Eyelid 

Surface lumineux 1 

1 x LED 

Type de montage 

Encastré mural

Forme et dimensions 

Longueur: 81 mm

Largeur: 18 mm

Hauteur: 81 mm




Couleur du luminaire: Noir, Anthracite / Graphite, Gris argent, Blanc


Puissance du système: 2,3 W

Classe de protection: III

Types de protection 

IP: 55

IK: 07

Fichier Photométrique

ZIP file