Suitable to be used in: Offices, clinics, education premises, circulation area & general indoor application.
Housing: Made of press welded Cold Rolled Steel "CRS" sheet of tight construction to prevent light leakage, all metal parts pre-treated with a full degreasing and phosphate process, painted in stove enameled white baked epoxy polyester mix-powder to ensure high reflectance of painted surfaces.
"Other color finishes upon request"
Light Controller: Double parabolic matt anodized aluminum louvers, with cut-off angle less than 65o.
Diffuser is held to the body by means of special steel springs allowing easy opening and diffuser suspension during maintenance.
Control Gear: High Frequency Electronic Control Gear "ECG".
High Frequency Dimmable Electronic Control Gear "ECG".
Voltage / Frequency: 120v, 127v, 220v or 277v / 60Hz. 230v or 240v / 50Hz
"Other Voltages upon request"
Cable Entry: 1x22 mm dia. hole on top.
"Extra knock-out holes upon request"
Lamps: 14, 28 & 35 watt FH T5/T16 Fluorescent for Electronic High Frequency "HF" Ballast "EB".
24, 49, 54 & 80 watt FQ T5/T16 Fluorescent for Electronic High Frequency "HF" Ballast "EB".
Emergency Unit: 90 Minutes or 3 Hours duration Emergency Unit "EMU" with battery pack Maintained "/M" or Non-Maintained "/NM" for one lamp, and for various lamp types and voltage networks combinations.
"Additional Emergency Units to operate more than one lamp on request"