Fichier produit




F-LINE-R 1../ 2.. Pendant LED luminaire Design: Single luminaire designed for pendant mounting with low-profile luminaire housing. Housing with seamless underside, in edged sheet steel, white (similar to RAL9016) or silver (-SI, similar to RAL9006) powder coated. Back of housing with fixing points spaced (35 mm) for variable wire pendant luminaire mounting. Indirect component with permanently mounted RIDI LED modules recessed into top of luminaire, covered with optically efficient longitudinal clear PMMA optics flush with the surface. Light colour 4,000 Kelvin (840), other light colours on request. For RIDI-TUBE lamps (order separately). Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic DALI converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: The luminaires are suitable for ceiling pendant mounting using wire pendants. Wire pendant mounting F-LINE 1.. with ZSPT2Z 190, F-LINE 2.. with ZSPT2Z 295. To configure F-LINE constructs, straight, L, T and X shaped connectors are available. F-LINE-R ... SM-I Parabolic mirror louvre SM made of matt super-purity anodised aluminium with silver coating. For RIDI-TUBE lamp, recommended cover: matt. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 50 W 5900 lm 82 lm/W 4000 K 80


Surface lumineux 1 

1 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1250 mm

Largeur: 150 mm

Hauteur: 25 mm




Couleur du luminaire: Gris argent, Blanc


Puissance du système: 50 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file