Fichier produit

Q5I-LED 2400-840 MPS



Surface-mounted luminaire Q Design: Square surface-mounted luminaire for ceiling and wall mounting, with RIDI-LED modules, direct-indirect beam. Recessed basic housing in white powder coated steel. Perforations on rear for indirect lighting component, perforations with covered with clear acrylic film. Cowling in powder coated steel white (similar to RAL9016) / silver (-SI, similar to RAL9006) with laid-in acrylic panel in UV-stabilised PMMA. Cowling with narrow rim is mounted using twist catches without the need for tools. LED module formed as a flat circuit board. Mid-power LEDs ensure even illumination and maximum efficiency. LED driver prefitted in luminaire housing. Operation of LED modules at safety extra-low voltage below 60 Volt (SELV-conformity). Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Surface mounting using supplied accessories. Pendant mounting with 2x ZSP.. Q.I ... LED-MPS Laid-in microprism acrylic panel made of UV-stabilised PMMA to reduce glare for correct illumination of VDU workstations. LEDs appear as circles on the panel. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
4 x LED 3,5 W 650 lm 137 lm/W 4000 K 80
Q5I-LED 2400-840 MPS

Q5I-LED 2400-840 MPS 

Surface lumineux 1 

4 x LED 

Type de montage 


Forme et dimensions 

Longueur: 499 mm

Largeur: 499 mm

Hauteur: 80 mm




Couleur du luminaire: Gris argent, Blanc


Puissance du système: 14 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file