Fichier produit




Surface mounted LED luminaire ABRFW-R Design: Surface mounted wall washer for ceiling or pendant mounting. Rigid luminaire housing, curved longitudinal sides in steel, white powder-coated (similar to RAL 9016). Welded-in end caps with rim and break-off openings for through wiring and continuous mounting. For single or continuous luminaire mounting. With continuous mounting, no optically continuous through reflector. For RIDI-TUBE lamps (order separately). Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Ceiling mounting without additional accessories / pendant mounting using the relevant fixing kits, see accessories. ABRFW-R Reflector for asymmetrical light distribution in high-reflectance matt anodised super-purity aluminium with silver coating. For RIDI-TUBE lamp, recommended cover: matt. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 35 W 4700 lm 105 lm/W 4000 K 80


Surface lumineux 1 

1 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1180 mm

Largeur: 131 mm

Hauteur: 60 mm




Matériau: Mâte

Couleur du luminaire: Blanc


Puissance du système: 35 W

Tension: 230 V AC

Alimentation: ECG

Types de protection 

IP: 20

Étiquette: CE, ENEC, F

Fichier Photométrique

ZIP file