Fichier produit

andrea

121153112

FLOS

• Pole top luminaire for installation on pole or wall (by a wall mounting bracket). • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) • The top cover in pre-galvanized sheet is secured to the housing by four extruded aluminium bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • The internal part of the top cover is painted in white for an enhanced light distribution. • Lamp housing in clear or opal acrylic 3mm thick. Silicone gaskets. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x Iodures métalliques 70 W 4900 lm 58 lm/W 4200 K 98
andrea

andrea 

Surface lumineux 1 

1 x Iodures métalliques 

Type de montage 

Montage en top

Forme et dimensions 

Hauteur: 560 mm

Diamètre: 740 mm

Réglable 

Rigide

Électrique 

Puissance du système: 70 W

Classe de protection: I

Types de protection 

IP: 65

IK: 07

Fichier Photométrique

ZIP file