Fichier produit

Indigo Combo Beta Opti 300x1200 830 VTB HL CLO

24196-529

Fagerhult

Installation Recessed mounting in suspended ceilings. Unventilated or ventilated ceilings. Two optional designs: – for suspended ceilings with visible T-bars (15 or 24 mm). HB –for suspended ceilings with concealed T-bars and symmetrical ceiling tiles (thickness 20-22 mm). Four suspension fittings included. For fixed roofs (plaster etc.) suspension fittings for an HB body can be ordered separately. Connection Connected to 2.5 mm² 3-way terminal block 3 x 1.5 mm2 (x2), with the possibility of through-wiring. 5 x 1.5 mm2 (x2) when dimming. Can also be supplied with mains cable and earthed plug or chassis mounted snap-in connector. The luminaire housing and driver are connected via a Quick Connection System. Design Luminaire body of white enamelled sheet steel (RAL 9016). Louvre Beta Opti – double parabolic side and cross reflectors in semi-gloss metallized aluminium with excellent reflective properties (> 92%), assembled into one unit. An integrated opal acrylic diffuser film (PMMA) minimises the risk of uncomfortable glare from the diodes. Dimming e-Sense Organic – PIR sensor with presence and daylight control. All luminaires have master/slave functionality with IR communications. Miscellaneous Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings. Class III applies to the luminaire body only. The supplied driver is Class II but should be connected to a functional Earth. 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 33 W 3975 lm 120 lm/W 3000 K 80

Type de montage 

Encastré dans le plafond

Forme et dimensions 

Longueur: 1196 mm

Largeur: 296 mm

Hauteur: 102 mm

Réglable 

Rigide

Design 

Couleur du luminaire: Blanc

Électrique 

Puissance du système: 33 W

Classe de protection: II

Types de protection 

IP: 40

Fichier Photométrique

ZIP file