Recessed light channel VENICE-EV
VENICE-E with offset gear tray joint is a narrow, rectangular light channel comprising a recessed carrier profile in natural anodised (-NE) extruded aluminium, with a rim along the longitudinal side to cover the sawn ceiling aperture, gear tray and optical control. At the lamp ends, offset gear tray with clip-mounted reflector and opal cover with a satinised finish in PMMA. The overlap of lamps at the offset gear tray largely avoids the formation of shadows at the ends of the lamps. The luminaires are available for wattages of 28/54 Watt and 35/49/80 Watt, and come in a 2 or 3-length version. Through wiring 5x2.5mm² with prefitted axial plug and socket. Sockets are mounted in the carrier profile for electrical adapation of the gear tray. Gear tray in sectional galvanized white coated steel. Gear trays can be mounted at any optional position in the mounting rail. Plastic-coated quick-release catch for fastening in the carrier profile. Carrier profile with key holes for permanent fixture spacing and with T-groove to accommodate lengthways sliding fixing elements. Narrow visible rim to cover the ceiling aperture. For almost rimless mounting, the surface-mounting light channel VENICE-A can also be mounted and concreted in using a suitable fixing kit.
• With dimmable electronic DALI multiwatt ballast (MW-EVG-DALI), warm start lamps, 220-240 Volt,
0/50-60 Hz, wired to electrical adapter with sliding contact for phase selection.
• With electronic multiwatt ballast (MW-EVG), warm start lamps, 220-240 volts, 0/50-60 Hz, wired to electrical adapter with sliding contact for phase selection.
VENICE-EV ... MPS
For extending a recess-mounted light channel with microprism cover. Transparent co-extruded plastic cover in clear UV-stabilised PMMA, with external microprism structure. Internal longitudinal fins for positioning made of impact-resistant UV-stabilised PMMA with opal light-impermeable coloration to prevent unwanted light reflection.