Continuous-row luminaire VLG-TF
Profiled LED gear tray in galvanised white coated steel. LED linear modules fitted with mid-power LEDs for outstanding efficiency. Operating in conformity with SELV, the boards are pressed over their entire surface onto the aluminium profile for optimum heat dissipation. Optional light colours 3000 Kelvin (830) or 4000 Kelvin (840) or 6500 Kelvin (865). Soldered joints of the LED modules are tested for cavities and resistance to vibration and torsion in compliance with the most stringent quality standards. Inclusive of L-TUBE-TF mounted using an adapter unit, with swivel facility from 0-45° in 15° steps without using tools. No thermal coupling between the LED modules and converters. Service life L80B50 at 50.000h. Linear optics in transparent UV-stabilised PMMA integrated in the aluminium profiles for narrow-beam light distribution. End caps in durable PC to match the colour of the cover. In conjunction with trunking VLT for the configuration of modular variable continuous lighting systems conforms to protection rating IP20. The gear trays can be mounted at any preferred location on the trunking. Electrical adapters for flexible take-off of the through wiring in the trunking with automatic PE conductor connection . Phase selection by means of sliding contact. Optical coding for simple installation. Mechanical coding to prevent incorrect installation (polarity reversal).
Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems.
Note: Luminaires comply with the D symbol requirements according to the new standard and FF according to the old standard.
VLG-TF ... -5
LED gear tray with blue colour coding for mounting in VLT-5, VLT-7 or VLT-11.
VLG-TF ...B840 (830): Linear optics with wide beam light distribution