TOWER family is designed with the clean-cut line to provide scenic lighting in modern architectural environment. Version with opal diffuser diffused the light symmetrically. It is suitable to be installed in gardens, pathways, squares and open spaces. The aluminium body together with high impact resistant plastic cover in Polycarbonate helps to protect the luminaires against vandalism and corrosion. It is operated with high power LED in COB technology from Citizen. We supply the bollard at different height according to the customer design. Anchorage unit for concrete foundation is available as an accessory. Spec • Designed, Manufactured and tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Polycarbonate diffuser. • Post-cured silicone gasket. • High quality LED module and driver. • Aluminium louver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual.
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x LED | 23 W | 3160 lm | 137 lm/W | 2700 K | 80 |
Type de montage
Borne
Forme et dimensions
Longueur: 150 mm
Largeur: 150 mm
Hauteur: 1000 mm
Réglable
Rigide
Électrique
Puissance du système: 25 W
Classe de protection: II
Types de protection
IP: 65
IK: 09
Fichier Photométrique
ZIP file