Fichier produit

OSQ-B type 2ME input A

OSQ-B-NM-2ME-A

Cree Lighting

OSQ-B The OSQ™ Area luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral, weathertight LED driver compartment. Versatile mounting configurations offer simple installation. Its slim, low-profile design minimizes wind load requirements and blends seamlessly into the site providing even, quality illumination. Applications: Parking lots, walkways, campuses, car dealerships, office complexes, and internal roadways. FEATURES • Full cut-off optics (NanoOptic® Precision Delivery Grid™) • Lumen output:8500 – 31000lm • System efficacy: Up to 150lm/W • CCT: 3000K, 4000K, 5700K (CRI Standard min.70, CRI 80 @3000K on request for MOQ) • Initial Colour Consistency: 4 steps MacAdam • Input Voltage: 220-240V • Driver equipped with temperature sensor to preserve optimal working conditions • Power factor: Up to > 0.9 at full load • L90B10 up to 140,000 hours Ta=25°C (according to IEC/ EN62717 and IESNA TM-21) calculated on LM80 report at 22,000 hours • Surge protection: 10kV CM/DM surge immunity according to EN 61000-4-5 and EN 61547 (Class I SPD equipped with LED signal). • Operative temperature: -40°C up to +50°C • Insulation class: Class I • Enclosure rated IP66 per IEC 60529 • Impact resistance IK08 • Cable type H07RN-F (Cable length Up to 10mt) • Control options: Field Adjustable Output, Dimming 1-10V, • Fixture assembled without the use of glues, totally dismountable and recyclable • LED Board equipped with integral ESD and Surge protection CONSTRUCTION AND MATERIALS • Die cast, low copper <0,4%, aluminum alloy housing for long weathering and reliability • Removable tray • Slim, low profile design minimizes wind load requirements. Integral, weathertight LED driver compartment and high performance heat sink integrated • Luminaire is designed to mount directly on 60mm tenons or poles through the AA (Adjustable arm) mount option and can be tilted +/-180°, in steps of 2.5° • The DA (Direct arm) mount option adapts to 76-152mm square or round poles • Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion WARRANTY AND CERTIFICATIONS • Limited Warranty: 10 years on Colorfast DeltaGuard® finish / 10 years on luminaire • CE mark / RoHs compliant • Certification to ANSI C136.31-2001, 3G bridge and overpass vibration standards • Risk group exempt in accordance with Standard CEI EN 62471 for photobiological safety (Tested IEC/TR62778) • Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117 • Compliant to: EN 60598-1; EN 60598-2- AVAILABLE DISTRIBUTIONS 275 (Type II Short 0.75) Asymmetric optic for street lighting 2ME (Type II Medium) Asymmetric optic for street lighting 3ME (Type III Medium) Asymmetric optic for street lighting and car parks 4ME (Type IV Medium) Asymmetric optic for street lighting and car parks 5ME (Type V Medium) Symmetric optic for street and area lighting 5SH (Type V Short) Symmetric optic for street and area lighting 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 103 W 16044 lm 156 lm/W 5700 K 70
1 x LED 103 W 15093 lm 146 lm/W 3000 K 70
1 x LED 103 W 15760 lm 153 lm/W 4000 K 70
OSQ-B type 2ME input A

OSQ-B type 2ME input A 

Surface lumineux 1 

1 x LED 

OSQ-B type 2ME input A

OSQ-B type 2ME input A 

Surface lumineux 1 

1 x LED 

OSQ-B type 2ME input A

OSQ-B type 2ME input A 

Surface lumineux 1 

1 x LED 

Type de montage 

Montage en top

Forme et dimensions 

Longueur: 430 mm

Largeur: 480 mm

Hauteur: 100 mm

Réglable 

Volant

Électrique 

Puissance du système: 103 W

Classe de protection: I

Types de protection 

IP: 66

IK: 08

Fichier Photométrique

ZIP file