Fichier produit




Moistureproof luminaire PFZOA-T16-R Design: Surface-mounted hostile environment luminaire IP66 for ceiling or pendant mounting. Luminaire housing in glass fibre-reinforced grey polyester. Sealing material to ensure protection rating compliance for the diffuser and captive diffuser clips made of ageing-resistant plastic (not oil-proof). For RIDI-TUBE. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request. Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 3x2.5mm². Suitable for direct voltage operation and use in central battery systems. Mounting: Ceiling mounting without additional accessories using fixing catches which clip into the luminaire (included with luminaire). Wall mounting possible with accessory ZBS-W PFZ (must be ordered separately). Note on “Food Hygiene Act”: These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires. These are suitable for use in the food industry. PFZOA-T16-R ... Opal, impact-resistant diffuser in UV-stabilised PMMA with internal longitudinal prisms. For RIDI-TUBE lamp (order separately), recommended cover: matt. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
2 x LED 40 W 5500 lm 113 lm/W 4000 K 80


Surface lumineux 1 

2 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1573 mm

Largeur: 145 mm

Hauteur: 101 mm




Puissance du système: 80 W

Types de protection 

IP: 65

Fichier Photométrique

ZIP file