Fichier produit

TORSTEN III FLS LED

9.003.9073.17

Leipziger Leuchten

recom. pole height: 3,00m – 6,00m light standards: low and medium lighting requirements lamp: incl. 1 FLS LED module 4 ; easy to replace colour temperature: 3.000K warm white or 4.000K neutral white LED gear: electronic driver below the luminaire head, up to 100.000 hours, CLO mode LED life expectancy: up to 50.000 hours/ L100 light control: at extra cost: power reduction optical system: directed light (multi layer) provided by a lens technology; dark sky light distribution: depending on the chosen module: S oval wide beam A asymmetrical wide beam P symmetrical light distribution luminaire head: incl. canopy made of aluminium, TORSTEN I: ø 600mm, TORSTEN VIII: ø 750mm, with a special white, reflective underside finish; base made of corrosion-resistant cast aluminium with plate for driver; powder coated wall bracket: with wall shield made of hot dip galvanised steel; powder coated colour: RAL or DB glazing: PMMA RESIST, clear, high-impact resistant wiring: completely wired; via a plug and socket connector below the luminaire head; WL: via a plug and socket connector within the wall shield installation: for top entry ø 76mm only; WL: to be screwed to the wall accessory: cable, column, pole accessories, fixing material for the wall installation – to be ordered separately application areas: for parkways, boulevards, schools, home for elderly people, hotels, factory premises, residential and local distribution roads, paths, cycle lanes, squares, car parks, shopping center, pedestrian zones 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 25 W 2613 lm 105 lm/W 3000 K 70
TORSTEN III FLS LED

TORSTEN III FLS LED 

Surface lumineux 1 (integré) 

LED 

Type de montage 

Montage en top

Forme et dimensions 

Hauteur: 550 mm

Diamètre: 200 mm

Réglable 

Réglable en hauteur

Électrique 

Puissance du système: 25 W

Types de protection 

IP: 65

Fichier Photométrique

ZIP file