Fichier produit

Cone1-Post Top

7203-0-3-611-XX

Unilamp

Description CONE is as its name suggests, a series of cone-shaped pole top and wall mounted luminaires with shielded light source. The recommended mounting height is between 3 – 4 metes. CONE2 is assembled with a glare suppression opal polymer which gives a wide light distribution. To avoid discolouration of the lens we have used a high quality PMMA clear cover. Recommended uses are in gardens, parks, residential areas, squares and public spaces. Aluminium pole, galvanized steel pole and anchor unit for concrete foundation are also available. Specification • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die-Cast Aluminium, Cast Aluminium alloy and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • PMMA cover. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof grommet(Wall Light) or M20 cable gland(Pole Light). • Pole light pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x Sodium basse pression 70 W 6000 lm 32 lm/W 1690 K 36
Cone1-Post Top

Cone1-Post Top 

Surface lumineux 1 

1 x Sodium basse pression 

Type de montage 

Montage en top

Forme et dimensions 

Longueur: 380 mm

Largeur: 380 mm

Hauteur: 3554 mm

Réglable 

Rigide

Électrique 

Puissance du système: 83 W

Classe de protection: I

Types de protection 

IP: 54

IK: 07

Fichier Photométrique

ZIP file