Fichier produit




Surface mounted LED luminaire ABRF-R Design: Surface mounted luminaire for ceiling or pendant mounting, direct beam. Rigid luminaire housing in steel with highly scratch-resistant white powder coating (similar to RAL9016). With welded-in end caps with edges and pre-stamped break-off openings for through wiring and continuous mounting. The louvre hinges down on both sides and is independently earthed for electrical safety. For RIDI-TUBE lamps (order separately). Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: ABRF 1../2..: longitudinal sides convex. Single or continuous mounting. For continuous mounting, no louvres with continuous optical effect. Ceiling mounting with supplied accessories oror pendant mounting using the relevant fixing kits (see accessories). ABRF-R ... SM Parabolic mirror louvre SM in high-reflectance, silk matt anodised super-purity aluminium with silver coating. For RIDI-TUBE lamp, recommended cover: matt. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 31 W 4500 lm 126 lm/W 4000 K 80


Surface lumineux 1 

1 x LED 

Type de montage 


Forme et dimensions 

Longueur: 1180 mm

Largeur: 131 mm

Hauteur: 60 mm




Matériau: Mâte

Couleur du luminaire: Blanc


Puissance du système: 31 W

Tension: 230 V AC

Alimentation: ECG

Types de protection 

IP: 20

Étiquette: CE, ENEC, F

Fichier Photométrique

ZIP file