Fichier produit




Continuous-row luminaire VLG-F Design: LED gear tray made of sectional extruded aluminium, powder coated white (…WS-…), silver (…SI-…) or black (...SW-...). RIDI LED linear modules fitted with mid-power LEDs for outstanding efficiency. Operating in conformity with SELV, the boards are pressed over their entire surface onto the aluminium base profile for optimum heat dissipation. Soldered joints of the LED modules are tested for cavities and resistance to vibration and torsion in compliance with the most stringent quality standards. No thermal coupling between the LED modules and converters. For simple, fault-free mounting, the colour code of the trunking profile indiates the direction of the emerging light. End caps made of thermoplastic for conformity with IP54 protection rating. The width of the gear tray is identical to the trunking. Spring steel clips for fixture of the gear tray in the trunking VLT. In conjunction with trunking VLT for the configuration of modular variable continuous lighting systems conforms to protection rating IP20 and IP54. The gear trays can be mounted at any preferred location on the trunking. Electrical adapters for flexible take-off of the through wiring in the trunking with automatic PE conductor connection. Phase selection by means of sliding contact. Colour and optical coding for simple installation. Mechanical coding to prevent incorrect installation (polarity reversal). Where gear trays are variably positioned and where the electrical components come into contact with the trunking connector, mounting is only possible using trunking connector VLTV …-600. Colour rendering in index Ra >= 80, colour temperature 3000 Kelvin (830). Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems. Note on “Food Hygiene Act”: These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires. These are suitable for use in the food industry. VLG-F ... B Linear optics with wide beam light distribution made of clear, UV-stabilised PMMA integrated flush in the gear tray. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
2 x LED 35 W 5300 lm 140 lm/W 3000 K 80


Surface lumineux 1 

2 x LED 

Type de montage 

Suspendu, Plafonnier

Forme et dimensions 

Longueur: 1537 mm

Largeur: 64 mm

Hauteur: 60 mm




Puissance du système: 70 W

Types de protection 

IP: 54

Fichier Photométrique

ZIP file