Hoja de dato de productos

theta led

519001 narrow beam


• Spotlight for outdoor installation on wall, ceiling or floor. • Configuration: turned aluminium body ( EN AW 6060 ). 316L stainless steel fixing bracket and methacrylate lens. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Stainless steel cable gland. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 3,4 W 71 lm 21 lm/W 6000 K 70
theta led

theta led 

Emisión de luz 1 (integrada) 


Tipo de Montaje 

Montaje en pared

Forma y medidas 

Altura ajustable: 43 mm

Diámetro: 43 mm




Potencia: 3,4 W

Clases de aislamiento: III


IP: 65

IK: 04

Dato fotométrico

ZIP file