Hoja de dato de productos

marco led

10711543

FLOS

• Square luminaire for outdoor installation on wall. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered glass with silkscreen border. The diffuser is fixed to the aluminium structure through a robotic gluing system. AISI 304 stainless steel fixing plate. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 3 W 103 lm 34 lm/W 6000 K 70
marco led

marco led 

Emisión de luz 1 (integrada) 

LED 

Tipo de Montaje 

Montaje en pared

Forma y medidas 

Longitud: 125 mm

Anchura: 125 mm

Altura ajustable: 50 mm

Ajustabilidad 

Fijo

Eléctrico 

Potencia: 3 W

Clases de aislamiento: II

Protección 

IP: 65

IK: 02

Dato fotométrico

ZIP file