Hoja de dato de productos




Recessed linear luminaire for outdoor/indoor installation in ground or ceiling. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Die-cast double closing end on each side allowing easy and safe maintenance, moulded silicone gasket, 8mm thick tempered sandblasted glass with silkscreen border mechanically fixed to the body by a silicone adhesive.Electrical components are installed on a removable frame. 

Equipo disponible Potencia nominal de lámpara Flujo de lámpara Eficiencia luminosa CCT CRI
1 x Tubo fluorescente T16 28 W 2900 lm 34 lm/W 3000 K 84


Emisión de luz 1 

1 x Tubo fluorescente T16 

Tipo de Montaje 

Empotrado en suelo

Forma y medidas 

Longitud: 1245 mm

Anchura: 100 mm

Altura ajustable: 79 mm




Potencia: 28 W

Clases de aislamiento: II


IP: 67

IK: 09

Dato fotométrico

ZIP file