Hoja de dato de productos

andrea

121153115

FLOS

• Pole top luminaire for installation on pole or wall (by a wall mounting bracket). • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) • The top cover in pre-galvanized sheet is secured to the housing by four extruded aluminium bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • The internal part of the top cover is painted in white for an enhanced light distribution. • Lamp housing in clear or opal acrylic 3mm thick. Silicone gaskets. 

Equipo disponible Potencia nominal de lámpara Flujo de lámpara Eficiencia luminosa CCT CRI
1 x Lámpara de halogenuro metálico 70 W 4900 lm 25 lm/W 4200 K 98
andrea

andrea 

Emisión de luz 1 

1 x Lámpara de halogenuro metálico 

Tipo de Montaje 

Montaje en el cima de mástil

Forma y medidas 

Altura ajustable: 560 mm

Diámetro: 740 mm

Ajustabilidad 

Fijo

Eléctrico 

Potencia: 70 W

Clases de aislamiento: I

Protección 

IP: 65

IK: 07

Dato fotométrico

ZIP file