Hoja de dato de productos

kappa led



• Bollard for outdoor installation on floor. • Configuration: Extruded aluminium body, aluminium base with 15 micron anodizing for high resistance to corrosion. Methacrylate diffuser. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 2,3 W 68 lm 30 lm/W 6000 K 70
kappa led

kappa led 

Emisión de luz 1 (integrada) 


Tipo de Montaje 


Forma y medidas 

Altura ajustable: 300 mm

Diámetro: 48 mm




Potencia: 2,3 W

Clases de aislamiento: III


IP: 65

IK: 06

Dato fotométrico

ZIP file