Light source LED Ballast Electronic ballast (HF). Body material & colour Housing in Aluzink or acid-proof steel with white epoxy/polyester powder coated finish. Alternatively in unpainted acid-proof steel. The diffuser is made of impact-proof polycarbonate (PC) with moulded silicone gasket and spring clips in acid-proof steel. Mounting The luminaire is supplied with fixed end brackets, triangle suspension or 2 x M8 hood nuts. Bracket for horizontal wire and revolvable bracket to be mounted on the fixed end bracket. M8 rod -, tube -, pole -, cable bridge -, side - and vibration suspension to be mounted through the M8 hood nut. M8 hood nuts with flexible CC and other special suspensions on request. Accessories Suspension kits. Connection 5 pole 6 mm² screw terminal block. Variants with 5 x 2,5 mm² through wiring.
Lamp type | Nominal lamp power | Total flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
LED | 19 W | 2565 lm | 135 lm/W | 4000 K | 80 |
Mounting mode
Ceiling mounted
Shape and measurements
Length: 724 mm
Width: 165 mm
Height: 128 mm
Adjustability
Fixed
Electric
System power: 19 W
Protection
IP: 67
IK: 10
Photometric data
ZIP file