Light source LED 1200 lumen out Colour tolerances: MacAdams 3 Colour rendering: CRI 80 Lifetime: Minimum 50 000 hours, L70 For precise lumen values please see the data sheet on item level Ballast Fixed output (HF) or DALI dimmable (100-1%). Body material & colour Manufactured with housing made of die-cast aluminium. Double layer polyester powder coated paint finish in 4 different colours; black, white, anthracite or aluminium grey. The diffuser is made of impact resistant opal acrylic. Supplied with silicon gasket and screws in stainless steel. Mounting Installation directly on the ceiling or wall. Accessories Set of two pcs. M20 cable glands for through wiring. Connection Cable inlet through membrane gland (cable Ø8-13 mm) on the backside of the luminaire. 3 pole (HF) or 5 pole (DALI) 2,5 mm² screw terminal block in the luminaire housing. Through wiring from the side is possible by drilling two holes for M20 cable glands. Outdoor use requires suitable flexible cables assuring the water tightness of the membrane gland.
Lamp type | Nominal lamp power | Total flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
LED | 18 W | 1260 lm | 70 lm/W | 4000 K | 80 |
Mounting mode
Ceiling mounted
Shape and measurements
Height: 89 mm
Diameter: 210 mm
Adjustability
Fixed
Electric
System power: 18 W
Protection
IP: 65
Photometric data
ZIP file