Product data sheet

miniSilvia on post

930179

FLOS

• Outdoor luminaire for installation on wall, ceiling and floor. The version “on post” is only for installation on floor. • Configuration: die-cast aluminium structure EN AB-47100 alloy (low copper content), extruded aluminium pole (version “on post”), borosilicate transparent or sandblasted glass, moulded silicone gaskets. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Halogen low voltage lamp without reflector 60 W 820 lm 7 lm/W 2800 K 100
miniSilvia on post

miniSilvia on post 

Light output 1 

1 x Halogen low voltage lamp without reflector 

Mounting mode 

Standing / Bollard

Shape and measurements 

Height: 950 mm

Diameter: 180 mm

Adjustability 

Fixed

Electric 

System power: 60 W

Appliance Class: I

Protection 

IP: 65

IK: 07

Photometric data

ZIP file