Product data sheet

delta led

507011

FLOS

• Wall light for outdoor installation on wall. • Configuration: turned aluminium body ( EN AW 6060 alloy ). 316L stainless steel fixing bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Extra clear tempered glass with silkscreen border, fixed to the body by a double-sided tape. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x LED 2.4 W 130 lm 38 lm/W 6000 K 70
delta led

delta led 

Light output 1 

1 x LED 

Mounting mode 

Wall mounted

Shape and measurements 

Length: 50 mm

Width: 100 mm

Height: 50 mm

Adjustability 

Fixed

Electric 

System power: 3.4 W

Appliance Class: III

Protection 

IP: 65

IK: 05

Photometric data

ZIP file