Product data sheet

hyperion led - ALUMINIUM

527011.2

FLOS

• Slim rectangular luminaire for outdoor installation on wall. • Configuration: die-cast structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Moulded polycarbonate emitting unit and polished aluminium cover fixed by double-sided technical tape (to be ordered separately). 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 7.5 W 391 lm 52 lm/W 6000 K 70
hyperion led - ALUMINIUM

hyperion led - ALUMINIUM 

Light output 1 (integrated) 

LED 

Mounting mode 

Wall mounted

Shape and measurements 

Length: 230 mm

Width: 160 mm

Height: 30 mm

Adjustability 

Fixed

Electric 

System power: 7.5 W

Appliance Class: III

Protection 

IP: 65

IK: 09

Photometric data

ZIP file