Product data sheet

Agar Prismatic-Indirect Light Bollard

7123-0-2-263-XX

Unilamp

AGAR a range of wall light and bollard with high power LED and AC COB light sources. It is generally installed in the walk ways, parks and open spaces. It provides general lighting for the architectural environment as well as being an eye-catching object. The diffuser lens in prismatic or opal are made from polycarbonate for vandal resistance. The lens spreads the light evenly on walls and any surfaces. We can produce the bollard at different height accordingly for customized solutions. An anchorage unit for is available as an accessory. Spec • Designed, Manufactured and tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Polycarbonate diffuser. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Halogen low voltage lamp without reflector 100 W 1200 lm 12 lm/W 2900 K 99
Agar Prismatic-Indirect Light Bollard

Agar Prismatic-Indirect Light Bollard 

Light output 1 

1 x Halogen low voltage lamp without reflector 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 325 mm

Width: 325 mm

Height: 888 mm

Adjustability 

Fixed

Electric 

System power: 120 W

Appliance Class: I

Protection 

IP: 54

IK: 08

Photometric data

ZIP file