• Wall light for installation outdoor. • Configuration: turned aluminium body ( EN AW 6060 alloy ) 316L stainless steel fixing bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Methacrylate diffuser fixed to the body by a double-sided tape.
Lamp type | Nominal lamp power | Total flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
LED | 2.5 W | 131 lm | 52 lm/W | 6000 K | 70 |
Mounting mode
Wall mounted
Shape and measurements
Length: 130 mm
Width: 75 mm
Height: 30 mm
Adjustability
Fixed
Electric
System power: 2.5 W
Appliance Class: III
Protection
IP: 65
IK: 03
Photometric data
ZIP file