Product data sheet

Pozzo I Opal LED 550 840 CLO

24294-528

Fagerhult

Installation Recessed mounting in ventilated or unventilated ceilings. Fixing brackets included with luminaire. An assembly plate should be used when installing in soft tile ceilings. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions. Connection Connection in driver box. The driver box can be positioned next to the luminaire. Snap-in terminal block 3x1.5 mm² (5x1.5 mm² where dimming is required). Through-wiring- possible. Design Luminaire in white (RAL 9016) structured finish. Luminaire housing of enamelled deep drawn aluminium. Diffuser of opalised acrylic. Dimming CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its service life. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 28 W 3224 lm 115 lm/W 4000 K 80

Mounting mode 

Ceiling recessed

Shape and measurements 

Height: 155 mm

Diameter: 583 mm

Adjustability 

Fixed

Design 

Colour of housing: White

Electric 

System power: 28 W

Protection 

IP: 20

Photometric data

ZIP file