Product data sheet

cielo

944813

FLOS

Recessed linear luminaire for outdoor/indoor installation in ground or ceiling. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Die-cast double closing end on each side allowing easy and safe maintenance, moulded silicone gasket, 8mm thick tempered transparent glass with silkscreen border mechanically fixed to the body by a silicone adhesive.Electrical components are installed on a removable frame. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Fluorescent lamp tubular T5 28 W 2900 lm 66 lm/W 3000 K 84
cielo

cielo 

Light output 1 

1 x Fluorescent lamp tubular T5 

Mounting mode 

Floor recessed

Shape and measurements 

Length: 1245 mm

Width: 100 mm

Height: 79 mm

Adjustability 

Fixed

Electric 

System power: 28 W

Appliance Class: II

Protection 

IP: 67

IK: 09

Photometric data

ZIP file