Product data sheet

Pom Prismatic-Wall Light

7551-0-3-611-XX

Unilamp

Description POM is the family of unshielded bollard with symmetrical light distribution. High power COB LED is installed inside this luminaire. It is available in 2 color temperature 3000K and 4000K. The impact resistant PC lens cover is available in prismatic and opal, both producing a uniform wide beam light distribution. POM is generally installed in the walk ways, parks, gardens, commercial areas and open spaces where general lighting is needed. We produce the bollard at different height according to the customer design. Anchorage unit for concrete foundation is available as an accessory. Spec • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Polycarbonate diffuser. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x High pressure sodium vapour lamp 70 W 6000 lm 86 lm/W 1690 K 36
Pom Prismatic-Wall Light

Pom Prismatic-Wall Light 

Light output 1 

1 x High pressure sodium vapour lamp 

Mounting mode 

Wall mounted

Shape and measurements 

Length: 9.84 in

Width: 6.89 in

Height: 13.27 in

Adjustability 

Fixed

Electric 

System power: 83 W

Appliance Class: I

Protection 

IP: 54

IK: 09

Photometric data

ZIP file