Industrial luminaire Design: Durable and highly resistant industrial luminaire IP66/68/69K. Tube-shaped luminaire housing made of UV-stabilised impact-resistant PC. Prefitted gear tray, white powder coated, formed as a reflector. Designed to permit toolless fixture of closures at both ends with silicone gaskets for compliance with protection rating. For RIDI-TUBE lamps (order separately). Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 3x2.5mm². Internal through-wiring, 3x1.5mm² with axial plug and socket. Mounting: Luminaire suitable for surface mounting on ceilings or walls using the relevant accessories (must be ordered separately). Note on “Food Hygiene Act”: These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires. These are suitable for use in the food industry. IRL… Tube made of UV-stabilised impact-resistant PC, transparent. For lamp RIDI-TUBE.
Available equipment | Nominal lamp power | Lamp flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
1 x LED | 48 W | 6760 lm | 114 lm/W | 4000 K | 80 |
Mounting mode
Ceiling mounted, Pendant
Shape and measurements
Length: 58.74 in
Width: 3.25 in
Height: 2.87 in
Adjustability
Fixed
Electric
System power: 48 W
Protection
IP: 20
Photometric data
ZIP file