Product data sheet

ZOID Bollard

7811-0-3-986-XX

Unilamp

ZOID a bollard with light emission on one side with glare shield louver. This device constructed with all approved components a high grade nonetheless; body of Zoid is corrosion resistant aluminium. Safety tempered glass is chosen as cover sealant rationale of the model. Zoid falls under Class 2 luminaire. It has glare shield slanted louver through out visibility where lights shine. As mentioned prior components were selected with stamp of approval, even LED engine is selectively high quality. To better protect materials from extreme condition coating with Nano Ceramic film were applied for parties interest. The bollard can be customized to required heights and an anchor unit for concrete foundation is available as an accessory. Spec • Designed, Manufactured and tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Safety glass cover. • Post-cured silicone gasket. • High quality LED module and driver. • White integrated louvers. • GFR PA6.6 Terminal block. • M20 cable gland. • Installation work has to be carried on according to the enclosed product manual. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x LED 25 W 3170 lm 127 lm/W 4000 K 80
ZOID Bollard

ZOID Bollard 

Light output 1 

1 x LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 5.31 in

Width: 3.74 in

Height: 35.10 in

Adjustability 

Fixed

Electric 

System power: 28 W

Appliance Class: II

Protection 

IP: 65

IK: 07

Photometric data

ZIP file